LED Module & Strip Housing — Linear Profiles
Linear housing for LED modules and strip lighting: single and twin extrusion profiles, end caps, diffuser retainers and click-in mounting clips. Cut to length on request so a sign maker or cabinet builder can order 300 mm and 3,000 mm on the same purchase order. Made by WERIX Metal from AL6063-T5 extrusion 0.5-0.8mm to a tolerance of ±0.1mm, finished with anodizing Type II. Typical order volume is from 1000 to 200000+. Free DFM quote within 24 hours.
Engineering drawing available on request
Send your target specifications — we reply with a drawing and a DFM quote within 24 hours.
LED Module & Strip Housing — Linear Profiles
Linear housing for LED modules and strip lighting: single and twin extrusion profiles, end caps, diffuser retainers and click-in mounting clips. Cut to length on request so a sign maker or cabinet builder can order 300 mm and 3,000 mm on the same purchase order.
| Part number | P-079 |
|---|---|
| Product type | LED Strip Housing |
| Industry | LED Lighting |
| Material | AL6063-T5 extrusion 0.5-0.8mm |
| Tolerance | ±0.1mm |
| Surface Finish | anodizing Type II |
| Manufacturing processes | extrusion profiling · cutting |
| MOQ / Volume | from 1000 to 200000+ |
LED Module & Strip Housing — Linear Profiles: manufacturing notes
Every part we ship has to perform in service, not just pass inspection. Below is how this led module & strip housing — linear profiles is specified and manufactured at WERIX, and which details in the drawing drive cost, lead time and yield.
What ±0.1mm actually requires on the shop floor
The drawing calls for ±0.1mm. On a part like this that is a process decision, not an inspection decision: it fixes which machine holds the critical features, how the part is fixtured for each operation, and whether a formed feature can be checked after coating or has to be measured before it. We confirm the first article against the drawing and record the values, so the tolerance is demonstrated rather than assumed. If a dimension in your drawing is tighter than this part needs, it is usually worth relaxing it — over-toleranced features are one of the quietest cost drivers in a sheet metal quote.
Finishing: anodising
anodizing Type II. Anodising converts the aluminium surface into a hard oxide layer instead of adding a film, so it does not chip and flake the way a coating can. It is the reason aluminium parts often ship anodised rather than painted, and the layer thickness is chosen for the service — decorative, wear-resistant or hard-anodised for moving surfaces.
Frequently asked questions
- What is the minimum order quantity for led module & strip housing — linear profiles?
- The order range for this part is from 1000 to 200000+. Below the low end of that range the tooling and setup are spread over too few pieces to be economic, so if you are prototyping we would normally build the first units from the same process route and quote the production quantity separately.
- Can the material be changed to reduce cost or weight?
- Yes — material substitution is one of the first things we raise in a DFM review, because it affects bend radii, welding process and coating system at the same time. Send the drawing and the service environment and we will set out the options.
- What finishing options are available for this part?
- The current finish specification is anodizing Type II. Powder coating, anodising, zinc or nickel plating, brushing and blasting are all available in-house, so the finish can be changed without changing supplier — and where the part will be seen, we match colour to the RAL or Pantone reference on your drawing.
- How long does production take, and what do you need from us to quote?
- Prototypes are typically 3–7 business days and production runs 7–15 days once the drawing is released and the finish is confirmed. To quote we need the drawing or CAD file (STEP, DXF, DWG, IGES or PDF), the material and finish, the quantity and the destination — and any tolerance or inspection requirement that is not already on the drawing. You get a DFM review with the quotation, not after it.
Sheet metal engineering guides
Zinc Plating vs Nickel PlatingZinc protects steel even when scratched, for cents. Nickel is harder and brighter but 3-5x the cost. The finish decision, in one table.Read More
Powder Coating vs Anodizing: How to ChoosePowder wins on colour and substrate range; anodizing wins on wear and thinness. Five rules that decide it, with the cost drivers behind each.Read More