客戶評價

Wir sind ein Unternehmen aus Deutschland und sind im Juni 2026 über Google auf Werix Metal aufmerksam geworden. Seitdem haben wir drei Bestellungen mit insgesamt 5.000 Blechgehäusen für Unterhaltungselektronik aufgegeben. Ursprünglich… 展開

我哋喺香港做車載電子，接嘅多數係車廠同改裝廠嘅訂單，鈑金件之前一直搵唔到穩陣嘅廠。舊年喺 Bing 香港搜到 Werix Metal 嘅網站，抱住試吓嘅心態聯絡咗。估唔到咁啱心水。老闆親自跟單，報價將每一道工序嘅成本列到清清楚楚，唔係齋畀個總數你。最難得係佢夠膽講真話。有張圖嘅折彎位太貼開孔，佢冇照做，直接帶埋技術員過嚟我哋寫字樓對圖，傾好先開料。做鈑金二十幾年嘅人，一睇圖就知邊度會出事。溝通又爽快，進度相片自動自覺 send… 展開

評價為買家原文（英語）。

We have been through the phase where a supplier is cheap and then the phase where they are expensive, and these are the first ones where the price has stayed and the quality went up. The engineering reviews got sharper over the years, not… 展開

評價為買家原文（英語）。

Stainless guards, chutes and drip trays for a bottling line, 130 pieces, all 304 with a 2B finish. Wine is aggressive on anything that is not properly passivated, and their passivation certificate actually lists the bath and the immersion… 展開

已採購Equipment Cover Panel→

評價為買家原文（英語）。

Aluminium 6061 frame plates for an agricultural drone, 6mm, waterjet plus fold where possible. Weight is everything on these so they reworked the flat pattern to remove two bends and one doubler, and it still passed our static load case.… 展開

已採購Equipment Base Plate→

評價為買家原文（英語）。

Clean room grade stainless panels, 304, brushed, 140 pcs. We needed the Ra value on the visible face documented and they measured it on every panel rather than sampling, which is unusual. The edges were rolled rather than sheared so there… 展開

我们公司在深圳，做消费电子外贸。外壳发到我们仓库，我们自己组装、测试，再整柜发到美国，一年两万套左右，这两年的钣金外壳都是伟欣做的。2024 年我在百度搜钣金厂，搜到他们官网。当时不敢直接下单，又去 1688… 展開

評價為買家原文（英語）。

Stainless splashbacks and shelves for commercial kitchens, 260 pcs. Every one is a slightly different size because they are made to the kitchen drawings, and they handled that without a per part setup charge. Lead time was 5 weeks… 展開

評價為買家原文（英語）。

Mine duty junction boxes, 180 pcs, 2mm SECC with a heavier powder coat than usual because of the abrasive dust underground. They asked what the coat had to survive rather than just quoting the RAL, and proposed a 120 micron build with a… 展開

已採購Junction Box→

हम 3mm की chapa से हल के हिस्से बनवाते हैं, साल में लगभग 5,000 pieces. दो साल में एक बार भी dimensional complaint नहीं आया। पहले जो supplier था वो हर बार 2-3 mm इधर-उधर कर देता था और हमें jig बदलना पड़ता था। अब वो झंझट खत्म है।